Welcome to Ji'nan Bojian Testing Machine Co., Ltd.

Standard for rigid polyvinyl chloride pipes:
GB/T 13664-2006 low pressure water conveyance with rigid polyvinyl chloride (PVC-U) pipes
This standard is applicable to pipes for low pressure water conveyance under nominal pressure 0.4MPa and below.
Mechanical properties to be tested for rigid PVC pipes: tensile yield strength test for rigid PVC pipes, hydrostatic test for rigid PVC pipes, ring stiffness test for rigid PVC pipes
Test, rigid PVC pipe flat test. Below is the platinum test machine manufacturer specializing in providing 4 kinds of test and implementation standards for rigid PVC pipes.
1. Tensile yield strength
Determined according to the requirements of GB/T8804.1-2003 and GB/T8804.2-2003
2. Hydrostatic test
Determined according to the provisions of GB/T61-203. The test temperature is 20 C, the test pressure is 4 times the nominal pressure and the holding time.
3. Drop hammer impact test
According to GB/T14152-2001, 10 specimens were selected. Each sample was impacted once. The D90 drop hammer was used. The weight of the drop hammer was 1 kg and the impact height was 1 m.
4. Ring stiffness test
Determined according to the provisions of GB/T9647-2003.
5. Flat test
According to GB/T9647-2003, the specimen is pressed to 50% of the original inner diameter to observe whether the specimen is cracked.