Welcome to Ji'nan Bojian Testing Machine Co., Ltd.

SERVICE HOTLINE:0531-87165551

Home>ProductClass>Torsion testing machine>Metal material torsion tester

  • BJNZ-5000Nm Microcomputer controlled automatic material torsion testing machine.

Product name:BJNZ-5000Nm Microcomputer controlled automatic material torsion testing machine.

Product model:BJNZ-5000Nm

Product range:5000Nm

Immediate consultationBJNZ-5000Nm Microcomputer controlled automatic material torsion testing machine.Online Message

<
>

Product introduction

BJNZ - 5000 - nm torsion testing machine computer control automatic materials used in products are automobile transmission shaft, high strength bolt drill pipe, oil pipe, coal and other kinds of torsion test on metal and nonmetal material, can achieve maximum torque and torsional strength, yield strength and yield strength and other performance parameters.

The torsion test machine is based on GB/T 10128 "test method for the torsion test of metal materials", JJG 269 "testing procedures of torsion test machine", which is developed and verified.

Host is loaded by a motor, transmission system, data acquisition, processing, control, display and other components of the system, it is mainly used for materials and finished goods torsion mechanics performance test at room temperature, can also be used for materials and finished goods to reverse damage performance test, etc.

The test specimen is installed in the adjustable space fixture and can be used to test the torsional mechanical properties of different tested samples.

The transmission shaft torsion tester adopts computer control operation, and the software synchronizes the torque - time, torsion Angle - time, torque - twist Angle, torque - Angle and other curves of the test specimen.

Real-time display Angle, torque, torque peak and other parameters;

The test results can be stored and printed.


Standard of execution

GB/T 10128 "test method for the torsion of metallic materials at room temperature"

JJG 269 verification procedures for torsion testing machine


Functional characteristics

1. Humanized Chinese Windows interface, menu display, simple operation.

2. Automatic storage, experimental conditions and automatic storage of experimental data can be transferred at any time as needed.

3. The experimental data and operation can be collected in real time.

4. Curve traversal.

The data of any point in the curve can be adjusted as needed.

5. Automatic analysis of experimental results to calculate the material characteristics of upper yield strength, lower yield strength and maximum torque point.

6. Sample inspection can be carried out for the product, and batch test can also be conducted (for the same parameters, once set in order).

7. Recording torque - time, twisting Angle - time, torque-twist Angle and torque-angle test curve, can be switched at any time, high-speed sampling.

8. The transmission shaft torsion test machine data is automatically saved.

And can print, print report can choose or prepare by oneself.


Technical parameter

Machine model bjnz-5000nm bjnz-10000nm.

Maximum test torque: 5000Nm 10000Nm.

Structural form horizontal structure, motor load, microcomputer control.

Torque measurement ranges from 2% to 100% of the range.

Torque minimum read value 1Nm.

Torque accuracy is better than + 1% (positive and reverse)

The torque repeatability error is better than the plus or minus 1% of the indicated value (positive rotation and reverse direction)

The minimum reading value of twist Angle is 0.1.

Maximum torsional Angle 99999 °

The accuracy of twist Angle is better than that of the indicator.

The minimum reading value of twist Angle is 0.0001.

The test speed is 0.1 °, 720 ° / min (Angle)

The accuracy of the test was better than that of the indicator.

Maximum spacing between clips 2000mm (customizable)

Two chuck alignment Φ 0.3 mm or less

The test turns in two directions.

Test machine level 1.

The appearance conforms to GB/T2611 requirements.

Power supply 220V, 50Hz.

The measuring machine size of the transmission shaft is about 3000mm*950mm*1550mm.

The machine weighs about 1050Kg.


prev:BJNZ-W500、1000、2000Nm Microcomputer controlled material torsion testing machine.

next:Screw torsion testing machine.

濟南鉑鑒試驗機

Copyright 2010-2017 siyuan. All Right Reserved

主站蜘蛛池模板: 国产一区二区免费在线观看 | 91小视频版在线观看www | 黄色一级片免费的 | 欧美视频区| 日韩a级毛片免费观看久久 精品一区二区在线播放 | 国产精品久久久久久久久免费丝袜 | 97视频国产 | 国产精品99久久久久久似苏梦涵 | 一区二区三区成人 | 国产精品一区二区av | 国产视频一二区 | 精品国产一区二区在线 | 国产激情视频在线 | 黄色片免费在线观看 | 久久综合九色综合网站 | 玖玖在线视频 | 欧美精品一区二区三区在线播放 | 91一区二区三区在线观看 | 国产精品美女久久久久 | 成人区精品一区二区 | 国产成人精品a视频一区www | 国产欧美久久久久久 | 99久久精品毛片免费播放高清 | 激情综合网五月 | 国产一区二区在线播放 | 岛国视频在线观看 | 日韩成人小视频 | 久久人人爽爽爽人久久久 | 国产成人久久精品麻豆二区 | 欧美久久久久久久久久 | 久久久久久亚洲 | 黄色片在线免费观看 | 欧美人交a欧美精品 | 福利在线播放 | 成人在线观看视频网站 | 天堂成人国产精品一区 | 久久久在线免费观看 | 国产精品视频免费在线观看 | 亚洲www啪成人一区二区麻豆 | 四虎四虎院5151hhcom | 国产二区免费视频 |